 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Hall ICs DN6848/SE/S 4.00.2 (1.0) Wide operating temperature range (-40C to +100C) One-way magnetic field operation I Overview In each of Hall ICs, a Hall element, an amplifier circuit, a Schmidt circuit, a stabilized power supply, and a temperature compensation circuit are integrated on a single chip by IC technique. The Hall element output is amplified by the amplifier circuit, and converted into the corresponding digital signals through the Schmidt circuit so that TTL and MOS IC are directly drivable. DN6848 4.50.2 (0.7) Unit: mm 2.00.2 (1.0) (5) 10.50.5 0.550.15 (1.0) 0.80.1 1.27 123 0.43 -0.05 5 2 +0.1 0.43 -0.05 +0.1 1 : VCC 2 : GND 3 : Output SSIP003-P-0000A I Features * High sensitivity and low drift * Stabilized temperature characteristics owing to additional integration of temperature compensation circuit. * Wide operating supply voltage range (VCC = 4.5 V to 16 V) * One-way magnetic field operation * TTL and MOS IC are directly drivable by the output. * Open collector output DN6848SE 4.520.3 Unit: mm 4.520.3 12.506.5 (0.72) (0.4) 1.540.1 1 : VCC 2 : GND 3 : Output I Applications * Speed sensor, position sensor, rotation sensor, keyboard switch, micro switch and the like 0.40.1 1.27 123 SSIP003-P-0000C (1.0) 0.550.15 (1.0) I Block Diagram (DN6848/SE/S) DN6848S 1 4 Unit: mm 3.00.3 0.950.2 0.40.2 1.50.3 0.60.2 N.C. or GND (2) Power supply circuit and temperature compensation circuit 1 2 3 VCC 3 Output 0.40.15 +0.15 2 Hall element Amplifier Schmidt trigger Output stage GND (4) 3.00.3 5.40.4 Note) The number in ( ) shows the pin number for the DN6848S. ESOP004-P-0200 Note) The packages (SSIP003-P-0000A, SSIP003-P0000C and ESOP004-P-0200) of this product will be changed to lead-free type (SSIP003-P0000H, SSIP003-P-0000J and ESOP004-P0200A). See the new package dimensions section later of this datasheet. 0.2 -0.05 0.10.1 1.6 1 : VCC 2 : N.C. or GND 3 : Output 4 : GND 49 DN6848/SE/S I Absolute Maximum Ratings Parameter Supply voltage Supply current Circuit current Power dissipation Operating ambient temperature Storage temperature Symbol VCC ICC IO PD Topr Tstg Rating 18 8 20 150 -40 to +100 -55 to +125 Hall ICs Unit V mA mA mW C C Note) This IC is not suitable for car electrical equipment. I Recommended Operating Range Parameter Supply voltage Symbol VCC Range 4.5 to 16 Unit V I Electrical Characteristics at Ta = 25C Parameter Operating magnetic flux density Symbol B1(L-H) B2(H-L) Hysteresis width Output voltage BW VOL IOH ICC VCC = 12 V VCC = 12 V VCC = 12 V VCC = 16 V, IO = 12 mA, B = 22 mT VCC = 4.5 V, IO = 12 mA, B = 22 mT Output current Supply current VCC = 4.5 V to 16 V, VO = 16 V, B = 0 mT VCC = 16 V VCC = 4.5 V Conditions Min 0.5 1.5 1 Typ 9 11 2 Max 21 22 0.4 0.4 10 6 5.5 Unit mT mT mT V V A mA mA Note) 1. The variation of operating magnetic flux density does not depend on supply voltage due to its built-in stabilized power source. (VCC should be confined to the range of 4.5 V to 16 V.) 2. A supply current increases by approximately 1 mA when its output level varies from high to low. I Technical Data * Position of Hall element (unit: mm) A Hall element is placed on the shaded part in the figure. DN6848 1.0 1.75 1.3 DN6848SE 1. 0 DN6848S 0 1. 1.0 1.63 1.25 1.0 1.5 1.0 1.5 Distance from package surface to sensor part 0.7 50 0.42 0.65 Hall ICs I Technical Data (continued) * Magneto-electro conversion characteristics Output voltage VO DN6848/SE/S Marked face BL-H BH-L Applying direction of magnetic flux Magnetic flux density B * Main characteristics Supply current Ambient temperature 8 Operating magnetic flux density Ambient temperature 25.0 22.5 VCC = 4.5 V 16 V BH-L 7 Operating magnetic flux density B (mT) 20.0 17.5 15.0 6 Sam ple 1 Supply current ICC (mA) 5 VCC = 16 V Sam 12.5 10.0 7.5 4 VCC = 4.5 V ple 2 3 Samp le 3 2 Samp 5.0 2.5 le 4 1 0 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Ambient temperature Ta (C) Ambient temperature Ta (C) Operating magnetic flux density Supply voltage 20.0 Ta = 25C 17.5 Low-level output voltage Ambient temperature 100 90 80 VCC = 12 V IO = 12 mA Operating magnetic flux density B (mT) 15.0 Low-level output voltage VOL (mV) 70 60 50 40 30 20 12.5 10.0 7.5 5.0 2.5 10 0 0 2 4 6 8 10 12 14 16 18 20 -50 -25 0 25 50 75 100 125 Supply voltage VCC (V) Ambient temperature Ta (C) 51 DN6848/SE/S I New Package Dimensions (Unit: mm) * SSIP003-P-0000H (Lead-free package) 4.500.20 (0.70) Hall ICs 2.000.20 (1.00) 0.550.15 (1.00) (1.00) 1 1.27 3 0.400.10 1.27 0.40+0.10 -0.05 * SSIP003-P-0000J (Lead-free package) 4.520.20 1 1.27 3 0.400.10 1.27 (0.72) 0.40+0.10 -0.05 1.540.10 * ESOP004-P-0200A (Lead-free package) 3.000.20 4 3 12.500.65 0.550.15 (1.00) (1.00) 4.520.20 10.500.50 4.000.20 (1.20) 3.000.20 5.400.40 0.15+0.10 -0.05 0.400.15 1 (0.70) 1.60 2 0.600.20 0.100.10 1.500.20 Seating plane Seating plane 52 |
Price & Availability of DN6848S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |